How To Manually Light Pilot Light On Gas Fireplace. After approximately one minute, release the gas control knob. Now push the ignitor button.
Ensure the gas is turned on to allow gas to the fireplace. After approximately one minute, release the gas control knob. How to manually light a fireplace?
How To Manually Light Pilot On Gas Fireplace?
From off position, turn gas control knob (reads off, on & pilot) counterclockwise to pilot position. Depending on how long it’s been since the gas fireplace was last used, ignition may take multiple attempts. Once this is accomplished, you can increase the gas to get the fire burning steadily.
Ensure The Gas Is Turned On To Allow Gas To The Fireplace.
Push in the pilot knob, which manually sends gas into the system. At the pilot position you will be able to push the knob the maximum amount toward the valve. Line up the knob with the word “pilot” or “pilot ignite” and hold it down so that a small amount of gas is released.
Click To See Full Answer.
Push in the pilot knob, which manually sends gas into the system. Turn the knob from the “off” to the “pilot” position. How to manually light a fireplace?
Turn The Safety Control Valve Knob To The Pilot Position.
Push in the pilot knob, which manually sends gas into the system. Similarly, it is asked, how do you light a propane. Depending on how long it’s been since the gas fireplace was last used, ignition may take several attempts before igniting.
Once The Pilot Is Lit, You Can Leave The Fireplace Pilot On And Turn The Fireplace On And Off At The Switch, Remote Or Other Application.
If the pilot doesn’t light, wait 10 seconds and push again. The steps involved in lighting your pilot on your gas fireplace include: Most gas fireplaces have a standing pilot light, which is a small flame that burns even when you aren't using the fireplace.
